We offer two ways to attach our Velcro strips on Textiles

1. Iron on / stick on Velcro

Remove silicon paper, stick Velcro on textile. In order to make sure that the Velcro does not fall off  when washing, Iron back of textile to fasten the adhesive.

2. metal pins & plastic cluches

A. Remove metal pins and plastic clutches from the card.

B. Separate woven strip (on Velcro) from the attached Velcro strip (adaptor).

C. Set the two metal pins on the adaptor's ends and one in the center,  by piercing through the "woolen" side of the adaptor.

D. Set adaptor (with the pins) on a textile. Pierce one  protruding pins in the textile and flatten adaptor on textile, same for second and third.

E. Set plastic clutches on the protruding pins. Make sure the pins go through one layer of textile, other wise the pins will not latch tight.